TX7140 Addressable Manual Call Point

The TX7140 Addressable Manual Call point use a non-breakable glass which is designed to press under light pressure triggering the call point into an alarm condition, with LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. The protected flap on the lower part is used for reset through supplied special tool

Technical Specifications

Listed : LPCB / CE-CPR

Compliance : EN 54-11:2001 + A1:2005

Power Rating

Input Voltage : 24VDC [16V to 28V]

Current Consumption Standby : 0.6mA, Alarm: 1.8mA

Call Point

Protocol/Addressing : T&A, Value range from 1 to 254

Indicator : Single LED / Steady On-when pressed

Material / Colour : Fireproof ABS / RED Glossy finishing

Dimension : 89 mm x 93 mm x 35 mm

Weight : 102g (with Base), 80g (without Base)

Class : Type A, Indoors

Operating Temperature : -10°C to +55°C

Ingress Protection Rating : IP43

Humidity : 0 to 95% Relative Humidity, Non condensing

Reviews

There are no reviews yet.

Leave A Review

Your rating *

No products in the cart.